Singer setup

Follow these instructions step by step to ensure that you are setting up your sewing machine correctly. The first step is removing all of the parts from their packaging and reading through the booklet that came with your sewing machine on how to put it together. This will ensure that everything was included in the box when you purchased it and give you an idea of what all of these pieces do.

Next, attach the other end of that metal rod to the base of your sewing machine. If there are any loose parts at this point, they will most likely be in the bobbin holder. Next, you will need to load the needle. There are two types of sewing machines: manual machines and electric machines. Manual machines have a loop in the needle threader, while electric machines insert a foot pedal for this step. This way, when you release your hand from under the needle it will automatically get threaded with no problems.

Over the years, these marvelous machines have evolved a lot while continuing to hold their age-old reliability and efficiency. In fact, some of the older models are high-sought after by sewing enthusiasts and collectors. If you have come across an older sewing machine at an auction, garage sale, or local market, make sure you determine its age and model first to ascertain that you are picking up an antique model.

You can do this by looking at the model number of the machine. On the other hand, on the older machines, it can be found on the small plate or the front panel. Once you have found the serial number, you can determine when the machine was launched.

If you want to choose an antique model, then go for the one that is over years old. Hello, I am Jessica Flores , and you are welcome to my website. I am a professional fashion designer and a seamstress. I always carried a passion for craftwork. My love for craft grew along with time.

I have spent years researching and practicing in this field to gather colossal experience. Your email address will not be published. December 18, December 27, Jessica 0 Comment.

Position the thread spool over the spool pin. Run the machine until the bobbin is filled and there is no more winding. Cut off the thread and release the bobbin from the winding pin Cut the ends of the trim from the top of the bobbins Lastly, put the winding indent of the handwheel back to the previous position by pressing on it.

Step 2. Putting In The Bobbin Rotate the handwheel to your side so that the needle is alleviated to the highest position. Press the bobbin-release button towards the right in order to remove the bobbin-cover plate Thereafter, insert the bobbin. Once you have inserted the bobbin, make sure to circle it against the clock when the thread is being pulled. First, pull the threat to the right through the slot and then pull it towards the left. Subsequently, place your finger slightly on top of the bobbin and continue to pull the thread.

Pull out around 15 cm of the thread and take it to the back of the machine under the presser foot. Step 3. Needle Threading The latest model of Singer sewing machines comes with an automatic needle threading system. Put the thread right under the thread guide. Pull-on the needle threader down and move the thread inside the hook. Mics usually require XLR connections. Check the lengths you need. Shorter cables are always best for less interference and they generally cost less, but check how much you need in your own setting and plan ahead.

They should be closed back, to prevent bleeding into your mic. You should have studio monitors. Studio monitors give you a much more accurate sound than regular speakers that are usually tweaked to sound good or have more bass, etc. It will reduce plosives in vocals. These shields are inexpensive and with condenser mics they are definitely necessary.